Function

As flexible as it is reliable, the MODULYS XM – a medium power modular UPS - can be configured to order.  This smart and modular system has been designed with longevity in mind.  With a proven design life of more than 20 years, it’s built to last.

Conformity to standards

EN/IEC 62040-1
AS 62040-1  EN/IEC 62040-2
AS 62040-2  IECEE CB Scheme  EN/IEC 62040-3
AS 62040-3

Advantages

Proven ultimate reliability

- Power modules with more than 1,000,000h MTBF – 3rd party certified.
- Power modules with embedded upstream and downstream galvanic separation and fast fuses.
- Smart selective disconnection of electronic parts: any potential fault is isolated inside the affected power module, without affecting the remaining modules.
- Totally independent power modules with distributed parallel control (no single point of failure, centralised control).
- Redundant parallel bus connection (ring configuration).

Minimum MTTR

- Fast and safe maintenance based on parts that can be all hot-swapped (like power modules, auxiliary mains bypass, electronic boards).
- Full frontal access to all components and subassemblies.
- Certified safe and completely automatic power module hot-swap
- Add or remove power modules in just only 2 minutes.
- Automatic power module self-configuration and testing.
- Automatic firmware alignment - whatever the version - without any human intervention.

High flexibility

- Easy to customise: complete set of pre-engineered and pre-tested parts to meet any customer need.
- Flexible Bypass short-circuit current withstanding that can be increased with the addition of extra plug-in "Bypass Module".
- Flexibile options for top, bottom and mixed top / bottom cabling.
- Flexibility to work on any grounding system: TN-S, TN-C, IT. 
- Flexibility in terms of energy storage technologies (VRLA, Li-Ion, Ni-Cd, ...).

Environmentally friendly

- Reduced ageing: 20 year designed life – that’s proven.
- Life cycle extension: “Forever Young” concept: modules and all subassemblies are plug-in, with compatibility guaranteed for 20+ years.
- Eco-design concept: designed with the environment in mind, the system’s components are easy to recycle.
- Remote diagnostics and troubleshooting for zero transport-related carbon emissions.

Parallelability up to 2MW

- up to 6 x 300kW and up to 4 x 500kW
- Unmatched flexibility, adaptable to all aspects of parallel architectures, arrangements and design.
- Capable of meeting any requirement for parallel configurations

Discover MODULYS XM: the flexible and ultra-reliable new UPS from Socomec – built to last!

Technical data

Power 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Number of power modules 1 to 6 1 to 13
Input / output 3/3

 

Input
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Voltage 400 V 3ph+N (340 V to 480 V)
Frequency 40/70 Hz
Power factor/THDI > 0.99 / < 1.5%

 

Output
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Power factor 1 (according to IEC/EN 62040-3)
Voltage 380/400/415 V ±1% 3ph+N
Frequency 50/60 Hz (configurable) ±0.1% free running
Voltage distortion < 1% (linear load), < 3% (non-linear load according to lEC 62040-3)
Overload 125% for 10 minutes, 150% for 1 minute

 

Bypass
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Voltage rated output voltage ±15% (configurable from 10% to 20%)
Frequency 50/60 Hz ±2% (configurable for GenSet compatibility)

 

Efficiency (TÜV SÜD verified)
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Online double conversion mode up to 96.5%

 

Environment
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Ambient temperature 0 °C to 40 °C (15 to 25 °C for maximum battery life)
Relative humidity 0 to 95% without condensation
Maximum altitude 1000 m without derating (3000 m max)
Acoustic level at 1 m < 67 dBA < 75 dBA

 

System cabinet
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Width 600 mm 1200 mm
Depth 890 mm 950 mm
Height 1990 mm
Weight (empty cabinet) 253 kg 675 kg
Degree of protection IP20

 

Standards
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Safety IEC/EN 62040-1, AS 62040-1
EMC IEC/EN 62040-2 Class C3, AS 62040-2
Performance VFI-SS-11 - IEC/EN 62040-3, AS 62040-3
Environmental IEC/EN 62040-4
Product declaration CE, RCM, EAC, CMIM, UKCA

 

Power module
Model 50 to 250 + 50 kVA/kW 50 to 600 + 50 kVA/kW
Height 3U
Weight 36 kg
Type Hot plug-in / Hot-swappable
MTBF > 1 000 000 hours (calculated and verified)

System

Electrical options

- High capacity battery charger.
- ACS synchronisation system.
- Internal backfeed isolation device.
- N+1 Bypass.
- Cold start.
- PEN kit for TN-C grounding system.
- Connection KIT for common mains

Communication

Standard communication features

- User-friendly 7” touch-screen multilingual colour graphic display.
- Power Slot tricolour led indicating the Power Module status.
- 3 slots for communication options.
- USB port to download the UPS reports and log files.
- Ethernet port for service purposes.

Communication options

- Dry-contact interface (configurable, voltage-free contacts).
- MODBUS RTU RS485 or MODBUS TCP.
- PROFIBUS / PROFINET gateway.
- BACnet/IP interface.
- NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
- REMOTE VIEW PRO supervision software.
- IoT gateway for Socomec cloud services and the SoLive UPS mobile app.
- Remote touch-screen panel.

Resources & Documentation

Assistance

Looking for product documentation?

Access product catalogues, operating instructions, technical documents, CAD files,  and more.

Questions? We Can help !

Contact our technical support.